Quick view
Victorian Ash Stretcher Pair
from $8.32
Quick view
Professional Quality Pine Stretcher Pair
from $11.60
Quick view
Western Red Cedar Stretchers
from $37.00
Quick view
Museo Aluminium Stretcher Pair 45mm
from $37.40
Quick view
Museo Aluminium Stretcher Pair 25mm
from $33.80
Quick view
Western Red Cedar Brace
from $12.89
Quick view
Professional Quality Pine Brace
from $4.99
Quick view
Victorian Ash Brace
from $4.73
Quick view
Museo Aluminium Stretcher Bracing
from $14.50
Quick view
MUSEO ALU-Frame - Cross Brace Connector
$3.95
Quick view
Museo Stretcher Assembly Kit With Allen Key
$58.45
Quick view
Museo Stretcher Assembly Kit Without Allen Key
$54.65
Quick view
MUSEO ALU-Frame - Corner Angle for Stretcher
$2.95
Quick view
MUSEO ALU-Frame - Corner Connector for Stretcher
$6.40
Quick view
MUSEO ALU-Frame - Corner Wedging Stretcher
$3.95
Quick view
Museo Aluminium Brace Kit
from $12.80
Quick view
MUSEO ALU-Frame - Brace Connector
$6.40
Quick view
MUSEO ALU-Frame - Screw Eyelets
$1.45
Quick view
MUSEO ALU-Frame Corner Angle Packet of 8
$23.60
Quick view
MUSEO ALU-Frame - Allen Key Tool
$3.95
Quick view
Canvas Pliers Holbein No.2
$70.40
Quick view
Canvas Pliers Holbein No.5
$185.00
Quick view
Replacement Rubber Jaws - Holbein No.5 Pliers
$10.78
Quick view
Rapid Staple Remover
$46.20
Quick view
Rapid Staples Series 13
from $49.80
Quick view
Rapid R23 Medium Duty Staple Gun
$159.30
Victorian Ash Stretcher Pair

Victorian Ash Stretcher Pair

$8.32 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Timber: Kiln Dried Victorian Ash
Profile: 44mm width, 31 mm thickness, 5mm tenon
Bevel: 9 degrees, i.e. 32mm outside thickness, 27mm inside thickness
Join: European mitred mortice and tenon with slots for wedges
Wedges: Revolution Plastic Wedges
Maximum Stock Size: Available as stock up to size 84 inches. Custom sizes available on request.
Victorian Ash is a hard and stable timber. It is heavier but more robust than pine or cedar. It is artists' quality for medium to large canvases and is suitable up to 3 metre lengths with adequate bracing. The deeper profile presents well if no framing is required.


Please Note: All Stretcher prices are quoted and sold in pairs. We recommend that you brace in 40 inch increments as a minimum. Go to correct Bracing HERE

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Professional Quality Pine Stretcher Pair

Professional Quality Pine Stretcher Pair

$11.60 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Strong and light, the Premium Quality profile continues to be asked for by artists. We have maintained this tradition by producing the profile in clear grade, kiln-dried Hoop Pine sourced from plantations in Queensland. Clear grade means that the timber is supplied free of knots. Hoop Pine is a superior timber to Radiata and other pine species commonly used for stretcher arms, as it is less prone to warping. These stretchers are laminated and finger jointed for added stability.

TECHNICAL DETAILS FOR PROFESSIONAL QUALITY PREMIUM PROFILE

Timber: Kiln-dried Hoop Pine
Profile: 67mm width, 22mm thickness
Bevel: 9 degrees, i.e. 22mm outside thickness, 17mm inside thickness
Join: European mitred mortice and tenon with slots for wedges

Go to correct Bracing HERE

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Western Red Cedar Stretchers

Western Red Cedar Stretchers

$37.00 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Western Red Cedar is a sustainably harvested timber that is highly respected for it's archival qualities. Stable, light and resistant to moisture and insect damage, Canadian Western Red Cedar remains the museum grade artist stretcher of choice for professional artists' who require maximum stability and lightness. It is particularly recommended for large scale works 2 metres and above with ample bracing.
Please Note: All Stretcher prices are quoted and sold in pairs.

TECHNICAL DETAILS FOR MUSEUM QUALITY PROFILE

Timber: Kiln-dried Western Red Cedar
Profile:  67mm width, 32mm thickness
Bevel:    9 degrees, i.e. 32mm outside thickness, 27mm inside thickness
Join:      European mitred mortice and tenon with slots for wedges

Wedges: Western Red Cedar
Maximum Stock Size: Available as stock up to size 84 inches. Custom sizes available on request.

Go to correct Western Red Cedar Bracing HERE

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm
Museo Aluminium Stretcher Pair 45mm

Museo Aluminium Stretcher Pair 45mm

$78.00 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

The Museo ALU Frame Stretcher System is lighter in weight than heavy duty wood stretcher bars yet more stable and warp free. They provide a crisp edge, true-to-square system that is truly revolutionary in construction. Crafted from durable aluminium, the Museo stretchers are edged with Norwegian spruce to provide a smooth, clean stretching bead, allowing ample room to back staple or nail your selected canvas or linen (with no edge ghosting). Cross bars can be added at any time without disassembly and a revolutionary 6 inch (15cm) Extender Bar allows for making virtually any stretcher bar size up to 150 inch, which combined with cross bracing, becomes completely dimensionally stable. Available in profile depths of 25mm and 45mm it offers great versatility for both framed and frameless artwork. Order your stretcher bars and bracing as normal along with a Stretcher Assembly Kit and or Brace Kit for quick assembly.

 

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm
Museo Aluminium Stretcher Pair 25mm

Museo Aluminium Stretcher Pair 25mm

$66.00 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

The Museo ALU Frame Stretcher System is lighter in weight than heavy duty wood stretcher bars yet more stable and warp free. They provide a crisp edge, true-to-square system that is truly revolutionary in construction. Crafted from durable aluminium, the Museo stretchers are edged with Norwegian spruce to provide a smooth, clean stretching bead, allowing ample room to back staple or nail your selected canvas or linen (with no edge ghosting). Cross bars can be added at any time without disassembly and a revolutionary 6 inch (15cm) Extender Bar allows for making virtually any stretcher bar size up to 150 inch, which combined with cross bracing, becomes completely dimensionally stable. Available in profile depths of 25mm and 45mm it offers great versatility for both framed and frameless artwork. Order your stretcher bars and bracing as normal along with a Stretcher Assembly Kit and or Brace Kit for quick assembly.

 

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Western Red Cedar Brace

Western Red Cedar Brace

$12.89 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Western Red Cedar Braces are made of kiln-dried Western Red Cedar to suit the Western Red Cedar Stretcher range.

TECHNICAL DETAILS FOR WESTERN RED CEDAR BRACES

Timber : Kiln-dried Western Red Cedar.

Profile: 67mm width, 24mm thickness

Bevel: Dressed All Round (DAR), corners bevelled

Go to Western Red Cedar Stretchers HERE.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Professional Quality Pine Brace

Professional Quality Pine Brace

$4.99 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

 Standard Braces made of kiln-dried Hoop Pine to suit Victorian Ash and PQ Pine Stretcher Bars. Braces are sold as single units.

TECHNICAL DETAILS FOR STANDARD BRACES

Timber: Kiln-dried Hoop Pine
Profile: 67mm width, 20mm thickness
Bevel: Dressed All Round (DAR), corners bevelled

Go to Victorian Ash Stretchers or PQ Pine Stretchers.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Victorian Ash Brace

Victorian Ash Brace

$4.73 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Standard Braces made of kiln-dried Hoop Pine to suit Victorian Ash and PQ Pine Stretcher Bars. Braces are sold as single units.

TECHNICAL DETAILS FOR STANDARD BRACES

Timber: Kiln-dried Hoop Pine
Profile: 67mm width, 20mm thickness
Bevel: Dressed All Round (DAR), corners bevelled

Go to Victorian Ash Stretchers or PQ Pine Stretchers.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing
Museo Aluminium Stretcher Bracing

Museo Aluminium Stretcher Bracing

$25.00 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
These Braces complement the Museo ALU Frame Stretcher System and provide a strong and dependable bracing system made of light weight but sturdy aluminium and completely dimensionally stable. They can be added at any time during the frame construction which give the artist real versatility during the stretching process. Quickly fit your Bracing Bars by selecting a Brace Kit to the bracing configuration you require. View the video below for assembly instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Cross Brace Connector
MUSEO ALU-Frame - Cross Brace Connector
MUSEO ALU-Frame - Cross Brace Connector
MUSEO ALU-Frame - Cross Brace Connector

MUSEO ALU-Frame - Cross Brace Connector

$3.95 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
A simple piece of hardware that makes assembling cross braces a breeze! Simply slide into the channel in the bracing and lock off with the Allen Key Tool. Allow 2 Connectors per cross brace. View the video below for installation instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key
Museo Stretcher Assembly Kit With Allen Key

Museo Stretcher Assembly Kit With Allen Key

$58.45 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
This Museo Aluminium Stretcher Kit provides you with all the required hardware to assemble a single Museo Aluminium Stretcher that is not requiring Bracing. If you are adding Bracing you will need to purchase one of the Museo Aluminium Bracing Kits depending on your bracing configuration. It includes 4 Corner Connectors, 8 Corner Angle Supports, 1 Corner Stretcher, 2 Eyelet Hangers and 1 Allen Key Tool

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key
Museo Stretcher Assembly Kit Without Allen Key

Museo Stretcher Assembly Kit Without Allen Key

$54.65 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
This Museo Aluminium Stretcher Kit provides you with all the required hardware to assemble a single Museo Aluminium Stretcher that is not requiring Bracing. It DOES NOT include the Allen Key Tool and assumes that you have purchased this assembly tool already. If you are adding Bracing you will need to purchase one of the Museo Aluminium Bracing Kits depending on your bracing configuration. This kit includes 4 Corner Connectors, 8 Corner Angle Supports, 1 Corner Stretcher and 2 Eyelet Hangers.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Corner Angle for Stretcher
MUSEO ALU-Frame - Corner Angle for Stretcher
MUSEO ALU-Frame - Corner Angle for Stretcher
MUSEO ALU-Frame - Corner Angle for Stretcher

MUSEO ALU-Frame - Corner Angle for Stretcher

$2.95 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
The Museo Corner Angles for the Aluminium Stretcher System are designed to create substantial added support for the corners, resisting flexing and separation. They are an integral part of the overall design and we recommend that you include 2 in each corner for front and rear support. They are available singularly here however you can purchase the Museo Corner Angle Packet of 8 or they are included in the Museo Stretcher Assembly Kits. View the video below for assembly instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher
MUSEO ALU-Frame - Corner Connector for Stretcher

MUSEO ALU-Frame - Corner Connector for Stretcher

$6.40 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
These corner connectors are easy to install and form a solid connection for your stretcher bars. Simply adjust the grub screws with the Allen Key Tool to loosen or tighten the corner joint. You require 4 for each stretcher frame and they are included in both Stretcher Assembly Kits.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Corner Wedging Stretcher
MUSEO ALU-Frame - Corner Wedging Stretcher
MUSEO ALU-Frame - Corner Wedging Stretcher
MUSEO ALU-Frame - Corner Wedging Stretcher

MUSEO ALU-Frame - Corner Wedging Stretcher

$3.95 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
This essential piece of hardware for the Museo Aluminium Stretching system is designed to quickly and efficiently apply pressure to the corner joint in the same manner as wooden wedges force the corner joint open. This has the effect of expanding the surface area of your stretcher slightly and tensioning it. It is available loose here or is included in the basic Stretcher Assembly kits. One unit is included in these kits however you can include up to 8 in your stretcher if you prefer for quicker wedging.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Museo Aluminium Brace Kit
Museo Aluminium Brace Kit
Museo Aluminium Brace Kit
Museo Aluminium Brace Kit
Museo Aluminium Brace Kit
Museo Aluminium Brace Kit

Museo Aluminium Brace Kit

$33.50 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
These Museo Aluminium Brace Kits are designed to provide you with all the required hardware to assemble your Stretcher Bars and Bracing. A large variety of configurations have been catered for in the Options dropdown below so please consider your requirements carefully. Each kit contains the recommended hardware to assemble the chosen bracing configuration. Extra hardware elements can be added individually if you require by selecting the individual hardware products available. View the videos below for installation instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Brace Connector
MUSEO ALU-Frame - Brace Connector
MUSEO ALU-Frame - Brace Connector
MUSEO ALU-Frame - Brace Connector

MUSEO ALU-Frame - Brace Connector

$6.40 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
Similar to the Corner Connectors this product is designed to quickly and reliably attach the Bracing bars to the Stretcher bars. You will need 2 Brace Connectors to fit each Brace positioned on opposite sides of the bar for balance. Simply tighten the grub screws with the Allen Key Tool for a strong connection. They are available singularly here or for your convenience we have created packages for the different bracing configurations in the Museo Aluminium Brace Kits. View the video below for assembly instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Screw Eyelets
MUSEO ALU-Frame - Screw Eyelets
MUSEO ALU-Frame - Screw Eyelets
MUSEO ALU-Frame - Screw Eyelets

MUSEO ALU-Frame - Screw Eyelets

$1.45 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
These screw hangers are simple to fit and strong enough to handle a medium to large stretcher frame. Always use heavy weight wire to hang your paintings. View the video below for installation instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame Corner Angle Packet of 8
MUSEO ALU-Frame Corner Angle Packet of 8
MUSEO ALU-Frame Corner Angle Packet of 8
MUSEO ALU-Frame Corner Angle Packet of 8
MUSEO ALU-Frame Corner Angle Packet of 8
MUSEO ALU-Frame Corner Angle Packet of 8

MUSEO ALU-Frame Corner Angle Packet of 8

$23.60 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
The Museo Corner Angles for the Aluminium Stretcher System are designed to create substantial added support for the corners, resisting flexing and separation. They are an integral part of the overall design and we recommend that you include 2 in each corner for front and rear support. Purchase this packet of 8 for your complete stretcher frame requirements. They are also available singularly or in the Museo Stretcher Assembly Kits. View the video below for assembly instructions.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

MUSEO ALU-Frame - Allen Key Tool

MUSEO ALU-Frame - Allen Key Tool

$3.95 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

The Museo Allen Key is specifically designed for the assembly of the Museo Aluminium Stretcher System. An ergonomic handle ensures that the assembly and disassembly of your Museo stretchers is efficient and comfortable. You may purchase it separately or it is included in the Museo Stretcher Assembly Kit with Allen Key.

 

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Canvas Pliers Holbein No.2

Canvas Pliers Holbein No.2

$70.40 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Holbein No. 2 canvas pliers are a lighter weight stretcher plier than the No. 5 and can be used effectively to stretch small to larger canvases. These pliers have a 60mm wide mouth jaw with a gripping teeth that hold the canvas secure once you have tensioned it before stapling. The 20cm long handle gives you good leverage to achieve any tension you require whilst stretching. A special feature is the spring loaded handle so that as you release the jaws they will spring open for the next section to be stapled.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Canvas Pliers Holbein No.5

Canvas Pliers Holbein No.5

$185.00 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Holbein No. 5 Molybdenum Canvas Pliers are among the best money can buy. These heavy duty pliers are designed to give a secure non slip pull on the canvas and are the best tool available for stretching large canvas.

These pliers make the job of stretching easier with wide and grippy rubber-lined jaws. The spring-loaded handles open automatically, ready for the next grip. As well as being excellent for large-scale canvases, the pliers can also be used at an angle for smaller jobs. They are made of a lightweight molybdenum alloy.

Dimensions: 117 mm wide mouth, 210 mm length. 330g weight.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Replacement Rubber Jaws - Holbein No.5 Pliers

Replacement Rubber Jaws - Holbein No.5 Pliers

$10.78 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.
Replacement rubber jaws for the Holbein Stretcher Pliers No. 5.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Rapid Staple Remover

Rapid Staple Remover

$46.20 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Easy to use staple remover for professional or DIY and home use. Ergonomic design and smart construction allows the R3 to grip and pull out almost any kind of staple without damaging surrounding material. Equally effective on staples with long legs and for working on a wide variety of surfaces. Measures 36mm x 226mm x 82mm.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Rapid Staples Series 13
Rapid Staples Series 13
Rapid Staples Series 13
Rapid Staples Series 13

Rapid Staples Series 13

$49.80 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Designed to fit the Rapid R23 Staple Gun. The precision cut fine wire staples are made from high performance steel which makes the fixed staple almost invisible. It is ideal for working with textiles and fine linens as the fine wire has minimal effect on the fabric. Also suitable for medium weight cotton and linen.

Packet contains 5000 staples.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.

Rapid R23 Medium Duty Staple Gun

Rapid R23 Medium Duty Staple Gun

$159.30 Save Liquid error (product-template line 131): Computation results to '-Infinity'%
/
Tax included. Shipping calculated at checkout.

Strong ergonomic design with high impact force. Ideal for tacking your canvas or linen to stretchers and general stapling around the studio. It has a comfortable grip, with an easy firing action with a recoilless action for effortless operation. There is a handle low staple indicator with staples loaded easily from the base. It accepts Series 13 staples from 4 to 8mm.

Our preferred logistics supplier is Australia Post. Occasionally the weight or dimensions of your parcel exceed the restrictions applied by Australia Post. Our preferred logistics provider then is Toll. Depending on the contents of the parcels varying surcharges may apply to the shipping applied to your order. For example Dangerous Goods classified products or products over 1.5 metres in length will incur a minimum surcharge of $60.

Paper is a fragile product, and our goal is to ensure it arrives to you safely. Extra packing will be used to ship it safely and although we do not charge for this, there may be an increase in logistics charges. We recommend that you consider purchasing a minimum of 5 sheets or pack quantities to both save on purchase price and shipping charges.

We aim to make the shipping charge as cost effective as possible and to ensure you receive your art supplies in good condition. Please review our complete Shipping Policy information from the link in the footer for more details.